LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Side Door Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Disconnect the speaker electrical connector.
  4. Disconnect the door lock actuator electrical connector.
  5. Disconnect the power mirror electrical connector.
    6. Fig 1: Front Door Wiring Harness
    GM838822Courtesy of GENERAL MOTORS CORP.
  6. Remove the wiring harness from the door through the pass-through hole (1) by releasing all retainers and noting their location for reinstallation.
  7. Disconnect the wiring harness from the body harness.
scientia non olet · About LEMON Manuals