Installation Procedure

Fig 1: Latch Mechanism

GM1428254

Courtesy of GENERAL MOTORS CORP.

Install the following parts:
- Endgate liner
- Endgate cap
- Endgate handle/lock rods
- Endgate handle bezel
- Endgate latch assembly (2)
- Both lower trunnions
Position the left side of the endgate to the lower left trunnion.

Fig 2: View Of Bolts & Endgate Trunnion

GM1428255

Courtesy of GENERAL MOTORS CORP.

At a 45-degree angle, set the right side onto the right lower trunnion (2).

Fig 3: Endgate Support Cable

GM1486510

Courtesy of GENERAL MOTORS CORP.

Secure both cables to the side panel cable bolts.
Close the endgate.
Latch and secure the spare tire carrier.