LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Access >> Diagnostic Information and Procedures >> Midgate Ajar Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, with the midgate fully closed, verify the scan tool rear closure ajar switch parameter is inactive.
    • If the rear closure ajar switch parameter is active, refer to Circuit/System Testing  for the Midgate Ajar Switch Circuit Test.
  2. With the midgate open, verify the rear closure ajar switch parameter is active.
    • If the rear closure ajar switch parameter is inactive, refer to Circuit/System Testing  for the Midgate Ajar Switch Circuit Test.
  3. If the liftgate ajar switch input to the BCM functions normally replace the IPC.
scientia non olet · About LEMON Manuals