Midgate Components

The midgate consists of the following components:

• Midgate control module-Integrated with the window motor is a non class 2 device that controls the operation of the midgate window, latches and defogger.
• Body control module-Receives midgate ajar signal from the midgate control module and signals the driver information center (DIC) with the ajar status.
• Driver door module (DDM)-Receives a switched 12-volt signal from the global up and down window switches and signals the midgate control module with their status.
• Global window switches-Part of the memory switch and sends a 12-volt signal to the DDM for global window operation.
• Midgate window switch-On the instrument panel and provides a switched 12-volt signal to the midgate control module for window operation.
• Midgate latch release switches-On the left and right side of the midgate and provides a switched ground signal to the midgate control module for control of the midgate latches.
• Midgate window regulator-Controls the window operation of the midgate.
• Left and right midgate latches-Receive a constant ground source and a switched 12 volts from the midgate control module to release the midgate.
• Left and right midgate ajar switches-Receive a constant ground source, are wired in series, and signal the midgate control module with midgate ajar status.
• Midgate 30-amp circuit breaker-Constant 12-volt battery source
• Accy 10-amp fuse-Switched ignition 12-volt source