LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Wiper Blade Element Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Wiper Blade & Components
    GM430069Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Replace the wiper blade element if it is removed from the wiper blade.
  1. Remove the wiper blade from the wiper arm. Refer to Windshield Wiper Blade Replacement .
  2. Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
  3. Pull the wiper blade element (3) out through the wiper blade claws (2).
scientia non olet · About LEMON Manuals