LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Washer Pump Replacement >> Removal Procedure

Removal Procedure

  1. Remove the washer solvent container. Refer to Windshield Washer Solvent Container Replacement .
    2. Fig 1: Identifying Washer Pump
    GM869089Courtesy of GENERAL MOTORS CORP.
  2. Remove the washer pump from the washer solvent container by gently prying the pump from the container using 2 flat-bladed tools.
  3. Remove the washer pump.
  4. Discard the washer pump grommet.
scientia non olet · About LEMON Manuals