LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Rear Window Wiper Blade Element Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Wiper Blade Element Claws
    GM348758Courtesy of GENERAL MOTORS CORP.
  1. Slide the wiper blade element through the bottom claw of the wiper blade.
  2. Guide the wiper blade element through the wiper blade claws until both of the locking tabs engage the bottom claw set.
  3. Install the wiper blade on the wiper arm. Refer to Rear Window Wiper Blade Replacement .
scientia non olet · About LEMON Manuals