LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Non-Functional Air Inlet Grille Panel Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Air Inlet Grille Panel
    GM825299Courtesy of GENERAL MOTORS CORP.
  1. Position the air inlet grille panel to the vehicle.
  2. Install the air inlet grille panel to the vehicle by applying downward pressure to the panel until fully seated.
scientia non olet · About LEMON Manuals