LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Underhood Lamp Replacement >> Installation Procedure

Installation Procedure

  1. Position the lamp to the hood.
    2. Fig 1: Underhood Lamp
    GM814427Courtesy of GENERAL MOTORS CORP.
  2. Tilt the lamp to engage the top hook to the hood.
  3. Apply light pressure at the bottom of the lamp to engage the retaining clip.
  4. Connect the electrical connector.
  5. Close the hood.
scientia non olet · About LEMON Manuals