LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Tail/Turn Signal Lamp Replacement (SUV) >> Removal Procedure

Removal Procedure

    Fig 1: Tail/Turn Signal Lamp Bulb (SUV)
    GM803116Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws from the lamp.

  2. Remove the lamp from the body.
  3. Disconnect the electrical harness at the connector.
  4. Turn the bulb socket counterclockwise.
  5. Remove the bulb from the socket.
scientia non olet · About LEMON Manuals