LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Tail/Turn Signal Lamp Replacement (SUV) >> Installation Procedure

Installation Procedure

    Fig 1: Tail/Turn Signal Lamp Bulb (SUV)
    GM803116Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the socket.
  2. Turn the bulb socket clockwise in order to lock.
  3. Connect the electrical harness at the connector.
  4. Install the lamp to the body.
    5. NOTE: Refer to Fastener Notice .
  5. Install the screws to the lamp.

    Tighten:  Tighten the screws to 6 N.m (53 lb in).

scientia non olet · About LEMON Manuals