LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Tail Lamp Guard Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Tubular Tail Lamp Guard Screws
    GM855707Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
    2. Fig 2: Adhesive Strip To Body
    GM855709Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws retaining the tail lamp guard.
    3. Fig 3: Tubular Tail Lamp Guard
    GM855708Courtesy of GENERAL MOTORS CORP.
  3. Carefully seperate adhesive strip from body.
  4. Remove the tail lamp guard from the vehicle.
scientia non olet · About LEMON Manuals