LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Parking and Turn Signal Lamp Replacement (SUV) >> Removal Procedure

Removal Procedure

  1. Remove the grille. Refer to Grille Replacement .
    2. Fig 1: Park/Turn Signal Lamp (SUV)
    GM1467139Courtesy of GENERAL MOTORS CORP.
  2. Open the hood.
  3. Remove the retaining nuts.
  4. Disconnect the electrical harness connector (2).
  5. Disengage the retaining clips.
  6. Close the hood.
  7. Remove the lamp.
  8. Remove the bulb socket by turning the socket counterclockwise.
  9. Remove the bulb.
scientia non olet · About LEMON Manuals