LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Identification Lamp Replacement (SUT Rear Header) >> Removal Procedure

Removal Procedure

  1. Protect the painted surface with 2 layers of masking tape.
  2. Insert a flat-bladed tool underneath the lamp on the outer edge in order to disengage the retention clip.
  3. Tilt the lamp rearward in order to disengage the lamp from the rear roof header.
  4. Disconnect the electrical connector.
  5. Remove the lamp from the rear roof header.
  6. Turn the bulb socket counterclockwise in order to remove the socket from the lamp assembly.
  7. Remove the bulb from the socket, if needed.
scientia non olet · About LEMON Manuals