LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> High Mount Stop Lamp Replacement (SUV) >> Removal Procedure

Removal Procedure

  1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (SUV) .
    2. Fig 1: High Mounted Stop Lamp & Harness (SUV)
    GM803121Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the high mounted stop lamp.
  3. Remove the retaining screws.
  4. Remove the grommet from the liftgate.
  5. Remove the lamp, with the attached harness, from the vehicle.
scientia non olet · About LEMON Manuals