LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Headlamp Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Wiring Harness & Headlamp
    GM1467135Courtesy of GENERAL MOTORS CORP.
  1. Remove the grille. Refer to Grille Replacement .
  2. Open the hood.
  3. Remove the retaining nuts.
  4. Disconnect the wiring harness.
  5. Close the hood.
  6. Fig 2: View Of Headlamp
    GM802877Courtesy of GENERAL MOTORS CORP.
  7. Remove the headlamp.