LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Headlamp Bulb Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Retaining Nuts & Connecting Electrical Connector
    GM1467132Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Disconnect the electrical connector (4).
  3. Remove the headlamp bulb retaining ring.
  4. Remove the bulb from the socket.
scientia non olet · About LEMON Manuals