LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Headlamp Bulb Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Retaining Nuts & Connecting Electrical Connector
    GM1467132Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the socket.
  2. Install the headlamp bulb retaining ring.
  3. Connect the electrical connector (4).
  4. Close the hood.
scientia non olet · About LEMON Manuals