LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Clearance Lamp Replacement (SUV) >> Installation Procedure

Installation Procedure

    Fig 1: Clearance Lamp Screw
    GM803118Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb.
    2. Fig 2: Clearance Lamp Bulb
    GM803117Courtesy of GENERAL MOTORS CORP.
  2. Install the lamp to the vehicle.
  3. Install the bulb socket.
  4. Install the lamp assembly by engaging the hook and tilting the assembly down into place.
    5. NOTE: Refer to Fastener Notice .
  5. Install the screw to the lamp assembly.

    Tighten:  Tighten the screw to 2.5 N.m (22 lb in).

scientia non olet · About LEMON Manuals