LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Clearance Lamp Replacement (SUT Front) >> Removal Procedure

Removal Procedure

    Fig 1: Clearance Lamp Screw
    GM803118Courtesy of GENERAL MOTORS CORP.
  1. Remove the screw from the lamp.
  2. Remove the lamp by lifting upward at the rear edge.
  3. Disconnect the lamp socket.
  4. Remove the lamp housing from the vehicle.
  5. Remove the bulb, if necessary.
scientia non olet · About LEMON Manuals