LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Diagnostic Information and Procedures >> Hazard Lamps Malfunction >> Circuit/System Description

Circuit/System Description

The hazard switch signal circuit is referenced from battery voltage by the BCM. When the hazard switch is activated, the signal circuit is grounded through the switch and the signal circuit voltage goes low. The BCM then sends an ON-OFF voltage signal through the fuses to the appropriate turn signal and side repeater lamps or to all of the turn signal fuses for hazard operation.

scientia non olet · About LEMON Manuals