LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Diagnostic Information and Procedures >> DTC B2585 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the park lamp relay.
  2. Connect a test lamp between the relay control circuit terminal 85 and the B+ circuit terminal 86.
  3. Command the parking lamps ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always ON, test the relay control circuit for a short to ground. If the circuit tests normal, replace the BCM.
    • If the test lamp is always OFF, test the relay control circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
  4. If all circuits test normal, test or replace the park lamp relay.
scientia non olet · About LEMON Manuals