Conditions for Clearing the MIL/DTC
Re-calibration with the correct calibrations for the vehicle, and cycling the radio to OFF, then to ON, will clear the DTC if there is no damage to the radio.
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 |
|
Go to Step 3 | System OK |
| 3 | Replace the radio. Refer to Control Module References
. Did you complete the replacement? |
System OK | - |