Circuit/System Description

The driver door switch (DDS) and the passenger door switch (PDS) receive a discrete input from the driver door ajar switch and the passenger door ajar switch respectively. Likewise, the body control module (BCM) receives a discrete input from both the left and right rear door ajar switches. The door ajar switches are normally open when the doors are fully closed. When a door is opened, the door ajar switch contacts close providing a path to ground. The instrument panel cluster (IPC) receives a GMLAN serial data message from the BCM, DDS, or PDS indicating the door ajar status and the driver information center (DIC) located at the bottom of the IPC, illuminates the appropriate door ajar message when one of the doors is open. If this message is displayed and the vehicle speed is greater than 8.1 km/h (5 mph), a chime will sound.