LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 L5-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Brake Switch - TCC >> Service and Repair >> Torque Converter Clutch/Cruise Control Release Switch Replacement

Torque Converter Clutch/Cruise Control Release Switch Replacement



Torque Converter Clutch/Cruise Control Release Switch Replacement

Removal Procedure




1. Disconnect the electrical connector from the torque converter clutch/cruise control release switch.
2. Complete the following in order to remove the torque converter clutch/cruise control release switch from the brake pedal bracket:
1. Rotate the switch counter clockwise.
2. Pull the switch from the retainer.
3. Push the locking tabs inward to release the retainer.

Installation Procedure




1. Slide only the torque converter clutch/cruise control release switch retainer into the brake pedal bracket, until the locking tabs are fully engaged.
2. Connect the electrical connector to the torque converter clutch/cruise control release switch.
3. Adjust the torque converter clutch/cruise control release switch. Refer to Torque Converter Clutch/Cruise Control Release Switch Adjustment.

scientia non olet · About LEMON Manuals