Evaporative Emission Hoses/Pipes Replacement - Engine

Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure

Caution: Refer to Fuel and Evaporative Emission Pipe Caution.

Caution: Refer to Gasoline/Gasoline Vapors Caution.

Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice.




1. Disconnect the evaporative emission (EVAP) line (1) from the throttle control module (2).
2. Disconnect the EVAP line (1) from the EVAP canister purge solenoid valve (3).
3. Remove the EVAP hose (1) from the engine.

Installation Procedure




1. Position the EVAP hose (1) to the engine.
2. Connect the EVAP line (1) to the EVAP canister purge solenoid valve (3).
3. Connect the EVAP line (1) to the throttle control module (2).