Radio Antenna Cable Extension Cable Replacement

Radio Antenna Cable Extension Cable Replacement

Removal Procedure

1. Remove the accessory trim panel.
2. Remove the radio.
3. Lower the instrument panel (I/P) compartment door to a full down position.




4. Disconnect the radio extension antenna cable (1).
5. Remove the clip retaining the extension cable.
6. Remove the cable from the vehicle.

Installation Procedure




1. Install the cable to the vehicle.
2. Install the clip retaining the extension cable.
3. Connect the radio extension antenna cable (1).
4. Close the I/P compartment door.
5. Install the radio.
6. Install the accessory trim panel.