LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Torque Converter Clutch/Cruise Control Release Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cruise Release Switch
    GM1302096Courtesy of GENERAL MOTORS CORP.
  1. Slide only the torque converter clutch/cruise control release switch retainer into the brake pedal bracket, until the locking tabs are fully engaged.
  2. Connect the electrical connector to the torque converter clutch/cruise control release switch.
  3. Adjust the torque converter clutch/cruise control release switch. Refer to Torque Converter Clutch/Cruise Control Release Switch Adjustment .
scientia non olet · About LEMON Manuals