LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2007
>>
H3 Automatic
>>
Repair and Diagnosis
>>
Transmission
>>
Hydraulic Diagrams
>>
Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Overhaul, Troubleshooting & Diagnosis
>>
Repair Instructions - Off Vehicle
>>
Torque Converter Installation
>>
Installation Procedure
Installation Procedure
CAUTION:
The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.
Fig 1: View Of J 21366 Installed On Torque Converter
Courtesy of GENERAL MOTORS CORP.
Install the torque converter.
Install the
J 21366
.