Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| A/C Compressor Mounting Bolt | 50 N.m | 37 lb ft |
| A/C Refrigerant Pressure Sensor | 4.8 N.m | 42 lb in |
| Air Distributor Duct Mounting Screw | 1.9 N.m | 17 lb in |
| Air Inlet Assembly Mounting Stud | 4.5 N.m | 40 lb in |
| Blower Motor and Fan Assembly Mounting Screw | 1.9 N.m | 17 lb in |
| Blower Motor Relay Bracket Mounting Screw | 1.9 N.m | 17 lb in |
| Blower Motor Resistor Mounting Screw | 1.9 N.m | 17 lb in |
| Compressor Discharge Hose to Condenser Fitting | 28 N.m | 21 lb ft |
| Compressor Suction and Discharge Hose to Compressor | 33 N.m | 24 lb ft |
| Compressor Suction Hose to TXV | 48 N.m | 35 lb ft |
| Evaporator Case Section to Blower Case Section Retaining Screw | 1.9 N.m | 17 lb in |
| Evaporator Tube to Condenser Fitting | 28 N.m | 21 lb ft |
| Floor Air Outlet Mounting Screw | 1.9 N.m | 17 lb in |
| Heater Core Access Cover Screw | 1.9 N.m | 17 lb in |
| Heater Inlet and Outlet Hoses Bracket Bolt | 25 N.m | 18 lb ft |
| Heater/Vent Module Mounting Nut | 4.5 N.m | 40 lb in |
| Heater/Vent Module Mounting Screw | 4.5 N.m | 40 lb in |
| Heater/Vent Module Mounting Stud | 4.5 N.m | 40 lb in |
| Receiver Drier Clamp Screw | 10 N.m | 88 lb in |