Air Bag Deactivation Switch: Service and Repair

Inflatable Restraint Instrument Panel Module Disable Switch Replacement

Removal Procedure

Caution: Refer to Restraint System Service Precautions.

1. Remove the instrument panel (I/P) trim bezel.




2. Remove the I/P module switch from the lower right opening of the switch plate panel.
3. Disconnect the I/P module switch electrical connector.

Installation Procedure

1. Connect the I/P module switch electrical connector.




2. Install the I/P module switch into the lower right opening of the switch plate panel.
3. Install the instrument panel trim bezel.