Circuit/System Description
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The yaw rate and the lateral accelerometer sensors are combined into one sensor, external to the electronic brake control module (EBCM). The vehicle stability enhancement system (VSES) uses the lateral accelerometer input when calculating the desired yaw rate. The EBCM supplies the 12 V to the yaw/lateral accelerometer sensor. The yaw/lateral accelerometer sensor communicates with the EBCM via discrete CAN Bus High and CAN Bus Low serial data circuits.