LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1369 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Low and Reverse Clutch Overhaul (6L90) >> Low and Reverse Clutch Plate Installation

Low and Reverse Clutch Plate Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Low & Reverse Clutch Plate Assembly & Components
GM1822775Courtesy of GENERAL MOTORS CORP.
Low and Reverse Clutch Plate Installation

Callout Component Name
1 Low and Reverse Clutch (Waved) Plate
2 Low and Reverse Clutch Plate (Qty: 6)
3 Low and Reverse Clutch Plate Assembly (Qty: 6)
4 Low and Reverse Clutch Backing Plate
5 Low and Reverse Clutch Backing Plate Retaining Ring
Tip:  Apply air to verify proper installation of all low and reverse clutch components.