LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1369 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Control Valve Lower Body Assembly Cleaning and Inspection

Control Valve Lower Body Assembly Cleaning and Inspection

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cleaning Control Valve Lower Body Assembly
GM1566324Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
Preliminary Procedure: Clean and inspect all valve components and the valve body. The control valve lower body is replaceable only as an assembly.
1 Clutch Piston Dam Feed Regulator Valve Train
2 Clutch Select Solenoid Valve 2 Train
3 Clutch Select Solenoid Valve 3 Train
4 Manual Valve
5 TCC Regulator Apply Valve Train