Floor Console Bezel Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Floor Console Bezel Assembly & Clips

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: To prevent component damage, DO NOT use metal tools to remove the trim.
1	Front Floor Console Bezel Assembly Tip: Use a flat-bladed plastic trim tool to carefully release the retainer clips along the rear edge of the bezel. Disconnect the electrical connections. Lift the bezel out of the console assembly.
2	Retainer Clips (Qty: 4)