LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1311 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Front Center Seat Replacement

Front Center Seat Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Center Seat Assembly & Components
GM1683832Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  2. Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1 Front Seat Assembly Nut (Qty: 4)
NOTE: Refer to Fastener Notice .

Tip:  Adjust the seat rearward to access the nuts.

Tighten:  45 N.m (33 lb ft)

2 Front Seat Assembly Bolt (Qty: 4)
Tip:  Adjust the seat forward to access the bolts.

Tighten:  45 N.m (33 lb ft)

3 Front Seat Assembly (Qty: 2)
Tip:  Disconnect the electrical connector.
4 Front Center Seat Assembly