Instrument Cluster Replacement (without RPO SLT)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement (with RPO SLT) or Instrument Cluster Trim Panel Replacement (Without RPO SLT) .
1	Instrument Panel Cluster Assembly Screw (Qty 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly. Tip: Disconnect the electrical connections. A replacement cluster assembly must be programmed. Refer to Control Module References .