Instrument Panel Trim Plate Replacement (Without RPO SLT)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Trim Plate (Without RPO SLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim plate cover. Refer to Instrument Panel Cluster Trim Plate Cover Replacement (without RPO SLT) .
1	Instrument Panel Trim Plate Assembly Procedure Disconnect the electrical connectors. If replacing the instrument panel trim plate, transfer all necessary components.
2	Retainer Clip (Qty: 6)

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel cluster trim plate cover. Refer to Instrument Panel Cluster Trim Plate Cover Replacement (without RPO SLT) .

Instrument Panel Trim Plate Assembly

Procedure

Disconnect the electrical connectors.
If replacing the instrument panel trim plate, transfer all necessary components.

Retainer Clip (Qty: 6)