Rear Seat Separation (Extended Cab w/A68)
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rear Seat Riser Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
. Tip: If separating the seats in the vehicle, fold the seat bottom up to gain access to the bolts. Tighten: 9 N.m (80 lb ft) |
| 2 | Rear Seat Assembly - 40 percent |
| 3 | Rear Seat Assembly - 60 percent |