Torque Converter Removal & Holding Fixture Installation (6L80/6L90)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Converter & Holding Fixture Component View

Courtesy of GENERAL MOTORS CORP.

Torque Converter Removal and Holding Fixture Installation (6L80/6L90)

Callout	Component Name
1	Torque Converter Assembly
2	Transmission Case Assembly Tip: Rotate the transmission so that the converter housing is up and secure with locking pin. Allow any remaining transmission fluid to drain from the case extension. Special Tools DT 47605 Holding Fixture Adapter. See Special Tools . J 3289-20 Holding Fixture Base Assembly. See Special Tools . J 8763-B Holding Fixture. See Special Tools .

Callout

Component Name

Torque Converter Assembly

Transmission Case Assembly
Tip:

Rotate the transmission so that the converter housing is up and secure with locking pin.
Allow any remaining transmission fluid to drain from the case extension.

Special Tools

DT 47605 Holding Fixture Adapter. See Special Tools .
J 3289-20 Holding Fixture Base Assembly. See Special Tools .
J 8763-B Holding Fixture. See Special Tools .