2-6 Clutch Piston Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying 2-6 Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	2-6 Clutch Spring Retaining Ring Tip: Ensure the DT 47761 is centered over the clutch spring. See Special Tools . Special Tool: DT 47761 Clutch Spring Compressor. See Special Tools .
2	2-6 Clutch Spring NOTE: Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
3	2-6 Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston.