LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1055 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Noise in First, Second, Sixth, or Reverse Gear

Noise in First, Second, Sixth, or Reverse Gear

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Noise in First, Second, Sixth, or Reverse Gear

Checks Causes
Center Support with 2-6 Low and Reverse Clutch Assembly (67) Inspect for worn or damaged output carrier outer sun gear shaft front and rear bushings (458 and 460).
Output Carrier Assembly (68) Inspect for a worn or damaged center support roller bearing assembly (485).