LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1055 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Noise During 3-4 or 4-3 Shifts

Noise During 3-4 or 4-3 Shifts

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Noise During 3-4 or 4-3 Shifts

Checks Causes
4-5-6 Clutch (with Output Carrier Shaft and Dampener) Hub Assembly (58)
  • Inspect hub assembly (475), dampener (476), and apply plate (477) for wear or damage.
  • Inspect for damaged or worn 4-5-6 clutch backing plate (432).
scientia non olet · About LEMON Manuals