LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Compressing Master Cylinder Locking Tabs
    GM913273Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the fluid level sensor.
  2. Use a needle nose pliers in order to compress the locking tabs at the opposite side of the master cylinder.
    3. Fig 2: View Of Master Cylinder Fluid Level Sensor
    GM913292Courtesy of GENERAL MOTORS CORP.
  3. Remove the fluid level sensor.
scientia non olet · About LEMON Manuals