LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Master Cylinder Fluid Level Sensor
    GM913292Courtesy of GENERAL MOTORS CORP.
  1. Install the fluid level sensor until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor.
scientia non olet · About LEMON Manuals