LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Brake Pedal Components
    GM793140Courtesy of GENERAL MOTORS CORP.
  1. Remove the pushrod retaining clip (4).
  2. Remove the stoplamp switch (2) and the pushrod (3) from the brake pedal stud (1).
    3. Fig 2: View Of Brake Pedal Bolt & Nut
    GM375693Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut from the brake pedal bolt.
  4. Remove the brake pedal bolt.
  5. Remove the brake pedal.
scientia non olet · About LEMON Manuals