LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Door Adjustment

Rear Door Adjustment

  1. Loosen the door hinge bolts and adjust the door by moving the door:
    • Upward or downward
    • Forward or rearward
    • Inward or outward
  2. Fig 1: Adjusting Front Door To Rear Door Gap
    GM839813Courtesy of GENERAL MOTORS CORP.
  3. Adjust the rear door to front door gap to 5 mm (0.2 in).
  4. Fig 2: Adjusting Rear Door To Body Side Panel
    GM839847Courtesy of GENERAL MOTORS CORP.
  5. Adjust the rear door to body side panel 5 mm (0.2 in).
  6. Fig 3: Adjusting Rear Door To Rocker Panel Gap
    GM839851Courtesy of GENERAL MOTORS CORP.
  7. Adjust the rear door to rocker panel gap to 5 mm (0.2 in).
  8. NOTE: Refer to Fastener Notice .
  9. When proper adjustment specifications are set,

    Tighten:  Tighten the hinge bolts to 25 N.m (18 lb ft).