LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Midgate Window Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Power down the midgate window.
  2. Open the midgate.
  3. Loosen the rear sail panel screws in order to aid in the removal and installation of the midgate weatherstrip.
    4. Fig 1: Midgate Weatherstrip
    GM1412508Courtesy of GENERAL MOTORS CORP.
  4. Remove the midgate weatherstrip from the pinch-weld flange and cargo box trim.
  5. Remove the midgate weatherstrip from the midgate opening.
scientia non olet · About LEMON Manuals