LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Wedge Replacement - Body Side >> Removal Procedure

Removal Procedure

  1. Open the liftgate.
    2. Fig 1: Liftgate Body Side Wedge
    GM832841Courtesy of GENERAL MOTORS CORP.
  2. Remove the fastener (1) retaining the wedge to the vehicle.
  3. Remove the wedge (2) from the vehicle. Note the wedge location and placement of the wedge seal.
scientia non olet · About LEMON Manuals