LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Handle Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Remove the hood insulator. Refer to Hood Insulator Replacement .
    3. Fig 1: Hood Handle & Fasteners
    GM856695Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners (1) retaining the hood handle to the hood.
  4. Remove the hood handle (2) from the hood.
scientia non olet · About LEMON Manuals